Traffic Updates

Traffic Advisory for the Week of February 3-9

January 31, 2020

Road Safety Reminder for the Week

TRAFFIC SIGNAL LIGHTS and what they mean:

  • A Solid RED light means "STOP" until the green light appears.
    Do not turn if a “NO TURN ON RED” sign is posted.
  • A Flashing Red light is the same as “STOP” sign.
    Come to a complete stop at the intersection before proceeding.
  • A Red Arrow means “STOP.” Remain stopped until the green signal or green arrow appears. Do not turn against a red arrow.
  • A Solid YELLOW light means "WARNING" and tells you that red signal is about to appear. When you see the Yellow, you should stop your vehicle, if you can do so without danger to other cars and wait for the green light before starting.
  • A Flashing Yellow light means "SLOW DOWN" and proceed with caution. Slow down and be alert before entering the intersection. Yield to any pedestrians, bicyclists, or vehicles in the intersection. You do not need to stop for a flashing yellow traffic signal light.
  • Flashing Yellow Arrow–This traffic signal light means turns are permitted (unprotected), but you must first yield to oncoming traffic and pedestrians and then proceed with caution.
  • A Yellow Arrow means the “protected” turning time period is ending. Be prepared to obey the next traffic signal light, which could be the green or red traffic signal light or the red arrow.
  • A Solid GREEN light means "GO", but you must allow any vehicles remaining in the intersection to go through before you may move ahead.
  • A Green Arrow permits the motorist to proceed in the indicated direction without interference from oncoming traffic after yielding to any vehicle, bicyclist, or pedestrian still in the intersection.
  • Traffic Signal Light Not Working (Blackout)
    When the traffic signal lights is not working properly, whether flashing red or no lights are showing, treat the intersection as if it is controlled by a “STOP” sign in all directions. This means that all traffic must come to a complete stop prior to proceeding, obeying the rules for a “STOP” sign.


 

Guam Construction Update

Motorists are reminded to drive cautiously through all construction zones, observe all posted speed limit and construction signs, and carefully heed to flaggers. Alternative routes and/or adjusting drive times when feasible are encouraged.

 

Route 3 Widening

Construction activities are ongoing along Route 3 from just north of Route 28 to Potts Junction.

The northbound right turn only lane from Route 3 onto Route 28 has been narrowed to aid in the completion of the work. Caution is advised for all northbound traffic at this intersection.

Artero Road between Route 3 and Mepa Lane will continue to be closed through Saturday, 2/8/2020. Motorists are advised to heed flaggers placed at the intersection of Route 3 and Mepa Lane for the morning and afternoon rush hours, and for the dismissal of school.

Paving activity scheduled for Thursday, 2/6/2020, will require a lane shift of the northbound traffic between Chalan Kareta and Starts Golf Course.
 

Harmon Industrial Park Roadway Rehabilitation

Hawaiian Rock Products (HRP) will continue construction activities on Harmon Industrial Park Road. There will be intermittent lane closures along the eastbound lane from Proline to Green Store starting at 7:00 AM till 5:00 PM.